Det var montert normale bremmeskiver bak, der denne bilen skulle ha dobbelt skiver med luftingsåpninger i senter. Skivene var da 10mm, mens de som skulle være der er 18 mm tykke. Da ble det fort problemer med bremmsekaliperene. stempelet i kaliperen kommer for langt ut, og lekkasjer kommer fort!

Hvordan bytte bremseskiver og klosser bak!

Verktøy:
14 mm fastnøkkel
17 mm fastnøkkel / Kopp med forlenger arm.
21 mm kopp til hjulene
Verktøy for å presse inn stempelet i kalipperene.
Gris beregnet for bremser

How to install new rear brake discs and pads
Lexus RX450h + most of Lexus and Toyotas
PART 16
Bildilla Magasin

This wasn’t what I thought!
Someone had made a big mistake!
Normal brake discs were installed at the rear, where this car should have double discs with ventilation openings in the center. The discs were then 10mm, while the ones that should be there are 18 mm thick. Then problems quickly arose with the brake calipers. the piston in the caliper comes out too far, and leaks quickly occur!

Tools:
14 mm open-end wrench
17 mm open-end wrench / Cup with extension arm.
21 mm cup for the wheels
Tool to press the piston into the calipers.
Pig intended for brakes

lexus #howtocars #howto #bildilla #brakes #automobile #losingbrakefluid #brakefluid

Lexus RX play list: https://youtube.com/playlist?list=PLOvmu0dPfSDGiAOhZ2zO2Al4Nnnhf-iQW&si=agVQqZBkdEGLK1yW

Losing Brake Fluid?

Short video hear: https://youtube.com/shorts/m5ZBDYd33Rw

Your vehicle’s hydraulic system is compromised, leading to reduced stopping power and potential total brake failure!

Inspecting for Leaks, While brake fluid is a closed system (meaning it shouldn’t just «disappear»), sometimes the issue isn’t an external drip, but a part wearing out.